Connect to the MQTT Server
The following steps are valid for connecting to the MQTT server using the MQTT.fx Client.
1) Create a new connection profile with the following settings
| Key | Value |
|---|---|
| Broker Address |
For VeriSign - A35IXNRWYOLJWQ.iot.eu-central-1.amazonaws.com For Amazon Root CA - a35ixnrwyoljwq-ats.iot.eu-central-1.amazonaws.com |
| Broker port | 8883 |
| SSL/TLS | Enabled |
| Protocol | TLS 1.2 |
| Self Signed certificates | Selected |
| CA File | VeriSign-Class 3-Public-Primary-Certification-Authority-G5.pem |
| Client Certificate File: | yourCertificate.cer |
| Client Key File: | yourPrivatKey.key |
| PEM Formatted | Selected |
Note: If an MQTT client attempts to connect to the AWS IoT message broker with the 'Clean Session' set to false, the client will be disconnected.
A sample connection profile is illustrated below
2) Select the Profile you created and connect to the MQTT Server. A green signal will indicate if you successfully connected to the MQTT Server:
